Dryer heating element1/26/2024 Test the resistance of the heating element to ensure it is faulty and needs to be replaced.If they do have continuity, they can be reused with the new heating element. If the sensors don’t have continuity, they will need to be replaced. Test the resistance of the two sensors.If it does have continuity, it can be reused with the new heating element. If the fuse doesn’t have continuity, it will need to be replaced. Test the resistance of the fuse with your multimeter.Here’s how to test the electrical components: If you don’t have a multimeter, you can proceed directly to step four. This step is optional and is only necessary if you have a multimeter so that you can test the sensors, fuse, and element to ensure they are all working correctly. If any screws are securing the housing unit in place, remove them, and you should be able to remove the housing and have access to the element.The fuse can be removed by disconnecting it and removing the screws that secure it in place. After the two sensors have been safely removed and placed out of the way, locate the heating fuse on the left-hand side of the housing unit.Once the sensor on the top has been removed, locate the sensor at the bottom of the unit, and remove it exactly how you removed the first one.Once removed, place it safely out of the way, as you’ll need to reattach it after you’ve replaced the heating element. If you find a sensor, remove it by first disconnecting the wires and then the screw that holds it in place. On the top of the unit should be a sensor.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |